The Alliance for Green Heat pursues retailers advertising uncertified wood furnaces

Six of the nine retailers AGH contacted stopped advertising uncertified furnaces within two weeks

Indoor furnaces are usually in the
basement, but can be in a garage.  Either
option often leads to better fuel storage
practices than outdoor boilers and
greatly reduces jacket losses.

On May 15, 2017, EPA regulations took effect that required all wood furnaces to include smoke the law changed on May 15.
reduction technologies and be certified by third party test labs. Some furnace manufacturers started educating their retailers early and stopped shipping uncertified furnaces during the winter. Others continued to ship units, and many retailers continued to advertise and sell uncertified furnaces after

Indoor wood and coal furnaces—also called warm, hot air, or forced air furnaces—were very popular in the US through the early to mid-1900s, then gradually their lost market share as fossil liquid fuel furnaces gained traction in the late 1900s. Then, outdoor wood boilers gained favor, becoming a far worse threat to local air quality than indoor furnaces and boilers had been for decades.

The Alliance began contacting retailers advertising uncertified furnaces to find out whether they knew about the change in regulations and how responsive they would be to information about the change. “We believe that all manufacturers and retailers should play by the same rules, so that the ones who do follow the rules don’t get undercut by ones who do not,” said John Ackerly, President of the Alliance for Green Heat. “And, we found that many if not most retailers will stop advertising products that are not legal to sell if they are politely and professionally approached by an organization that is knowledgeable about the rules,” Ackerly said.

AGH Project Manager Melissa Bollman contacted nine retailers advertising uncertified furnaces. Of those, six stopped advertising those boilers within 2 weeks. Some of the furnaces were removed from the website entirely or are listed as unavailable, while other models that were previously advertised as capable of burning wood or coal have been rebranded as “coal only” to comply with EPA regulations.  Currently, if a stove or boiler is advertised as being able to burn wood, it must be tested and certified to burn wood.  (The EPA does not regulate coal heaters and some manufacturers have just added a grate and continue to sell the same unit as “coal only”.)

AGH efforts were not always effective, and a few retailers still appear to be advertising uncertified wood furnaces (see screenshots below). These include Sears’ online marketplace (orders fulfilled by the third party 123Stoves, Inc.), Homeclick, and HVAC direct. All screenshots were taken on June 22, 2017.

Houzz.com, Wayfair, and HVAC direct continue to sell uncertified wood furnaces or ones that are labeled wood/coal. The units they are selling are all made by US Stove Company, whose business model leaves it vulnerable to illegal sales of its units by multiple retailers.

AGH regularly monitors advertising by manufacturers and retailers in order to better educate consumers about misleading claims. We also publicize the names of manufacturers who provide better information and do not mislead consumers.

This continued advertising and sale of products that are no longer compliant highlights the danger that stranded inventory can pose for retailers when deadlines pass. If the 2020 emission rules are not delayed or changed, some wood stove retailers may get stuck with inventory that they are no longer allowed to sell, but are under pressure to unload to recoup their investment.

Without regulation, wood furnaces often sold for $ 1,000 – $ 2,000, less than many certified wood stoves. Even after the 2017 rules took effect, certified wood furnaces remain affordable with most selling for $ 2,100 to $ 3,200. Ten models are now certified, ranging from a more expensive European-designed pellet furnace at 89% efficiency to a very basic US Stove model 1330E that is 33% efficient.

However, the future of this class of wood heaters is far from secure, as EPA rules require wood furnaces to emit no more than 0.15 lbs/mmBtu as of 2020. Other than the European-designed pellet furnace, the other certified furnaces are not at all close to meeting that standard. Wood furnaces saw extremely little technological development until they were required to be certified between 2005 and 2017, and the sector is far behind the levels of controls that have been built into stoves and boilers.

Screenshots:


 https://hvacdirect.com/us-stove-1500-wood-coal-furnace.html 
 http://www.homeclick.com/vogelzang-vg1500-norseman-1500-sq-ft-wood-burning-add-on-furnace/p-878127.aspx

Heated Up!

Alliance for Green Warmth to undertake wooden stove alter out evaluation for West Penn Electricity Sustainable Energy Fund

March 22, 2016 – The Alliance for Environmentally friendly Warmth acquired a $ fifteen,600 grant from West Penn Energy Sustainable Energy Fund (WPPSEF) for a wooden stove adjust out evaluation.
The grant money will be utilized to suggest alternatives for plans that remove present older stoves, and substitute them with new, wood burning appliances that fulfill or exceed the U.S. Environmental Defense Company (EPA) 2020 New&nbspSource Efficiency Requirements wooden heater restrictions.&nbsp This kind of a software must also consist of a measurement and verification ingredient that ensures existing wooden stoves are taken off, taken off the market, and disposed of.

In addition, the venture will check out the integration of a wood stove modify out system into existing funding or incentive packages, as properly as a household vitality performance software that will drastically minimize wooden smoke emissions and deal with home ease and comfort and air high quality security worries.
“Woody biomass is an plentiful renewable warmth feedstock which has been employed by generations to offer low-value heating for residences throughout Pennsylvania. &nbspWPPSEF seeks to much better comprehend how older wooden burning stoves can be changed by point out-of-the art stoves that fulfill or exceeds EPA’s 2020 New Supply Performance Specifications even though making certain the outdated stove is removed from the marketplace.&nbsp WPPSEF is striving to build a price-effective plan that support homeowners exchange their old wood stove and although enhancing neighborhood air top quality and residence comfort” suggests Joel Morrison, Director of the WPPSEF.
&nbsp# &nbsp# &nbsp#
The Alliance for Eco-friendly Heat encourages present day wooden and pellet heating programs as a minimal-carbon, sustainable and inexpensive energy solution. The Alliance operates to progress cleaner and much more productive household heating engineering, particularly for reduced and center-cash flow households. Launched in 2009, the Alliance is an impartial non-profit group and is tax-exempt beneath part 501c3 of the tax code.
The West Penn Energy Sustainable Strength Fund (WPPSEF) is a 501(c)(3) nonprofit organization that invests in the deployment of sustainable strength systems that gain West Penn Electricity ratepayers in Pennsylvania. WPPSEF investments are targeted in a few broad groups:
ü&nbsp Deployment of sustainable and clear vitality systems
ü&nbsp Deployment of vitality effectiveness and conservation systems and
ü&nbsp Facilitating financial growth, environmental betterment, and community training as they relate to sustainable strength deployment in the WPP services location.
Visit http://www.wppsef.orgfor additional data.

###

Heated Up!

EPA takes step towards a “green label” for wood and pellet heaters

The EPA issued its long-awaited voluntary hangtag, which will help consumers identify the cleanest burning wood and pellet heaters on the market. Only manufacturers who make stoves and boilers that already meet the stricter 2020 emissions standards can use the hangtag.
The hangtag is a major step towards a “green” or “eco-label” for wood and pellet stoves for designating those stoves that emitted the least amount of smoke in the test lab. The hangtag has a line to record efficiency, if the manufacturer chooses to disclose it, but disclosing efficiency is not required.  The Alliance expects some stoves with higher efficiencies to list their efficiency on the hangtag, and stoves with lower efficiency numbers to not disclose their efficiency. 
Most European countries have had eco-labels specific to stoves for many years that have helped drive the market to exceed the minimum emission and efficiency standards.  The EPA designed this hangtag “to provide an incentive to manufacturers to meet the federal 2020 standards early” but the main industry stove association, the Hearth, Patio & Barbecue Association (HPBA) is suing the EPA to prevent those stricter 2020 standards from taking effect.  It is still too early to tell if the big stove manufacturers may decline to use the hangtag because they may view it as a step toward the 2020 standards. Some smaller companies, that are not members of the HPBA, are already taking steps to display the hangtag. 
The current emission standard for wood and pellet stoves is 4.5 grams per hour and the more stringent 2020 standard will be 2.0 grams per hour.  There are 76 models of pellet stoves on the EPA’s list of certified stoves and 48 of them are already under the 2 grams per hour limit, so 63% of pellet stove models already meet these 2020 standards and are eligible to display the consumer hangtag.  Eleven stoves, or 14% of all pellet stoves are already less than 1 gram per hour.
More than 2-dozen non-catalytic stoves and more than 2-dozen catalytic stoves are eligible to use the hangtag.  (Unlike pellet stoves, the emissions from wood stoves are not designed to estimate emissions from in-home use and homeowners will typically emit far more smoke than labs can achieve during a certification test.)
Among EPA certified wood and pellet boilers, there are 72 models on the market and 38 of them meet the 2020 emissions standards and can use the hangtag.  Of those 38, only 5 of the models use cord wood achieve the 2020 standards but virtually all of the pellet units (33 out of 35) achieve the 2020 standards. Most of the certified pellet boilers are technologies imported from Europe and emit about one tenth of the emissions that certified cord wood boilers emit.
The development of the hangtag posed a number of concerns for the EPA, including whether they should list heat output in BTUs per hour, which is already included on the EPA’s list of certified stoves. The EPA decided to use a more general estimate of heat output, “Heating Area” in square feet,

estimated by the companies themselves, because BTU per hour claims have become too unreliable and prone to exaggeration.  In the past, the EPA did not require that test labs use actual efficiency numbers in heat output calculations, allowing test labs to use a range of efficiency estimates to make stoves look far more powerful that they actually are.

The hangtag also provides a box for companies to designate if they test with cordwood. So, for the first time ever, consumers can start to identify stoves that are designed and tested with the fuel that they would typically use themselves.  No stove has been certified with cordwood yet and the ASTM cordwood test method is still in progress, but several companies are expected to test with cordwood in coming months.
The EPA is using the back of the hangtag to list important educational messages.  Among those messages is the strongest endorsement yet of certified pellets, a move that will irritate many pellet manufacturers who have been resisting getting their pellets certified.  The EPA went so far as to claim that “non-certified pellets may be high in ash content, low and energy output, and have impurities that could harm your families health.”  While some cheaper pellets have high ash content, low heat output and possibly even contain impurities, the quality of many uncertified pellet brands are on par with those that are certified and some of the highest quality pellets are not certified.

The EPA’s willingness to strongly endorse pellet certification comes at a time when the main certifying body, the Pellet Fuel Institute (PFI), is also suing the EPA over some of the finer points of requirements that the EPA puts on pellet certification.

The success of the EPA’s consumer hangtag, like many eco labels, may hinge on branding and how recognizable the hangtag is to consumers.  If the EPA, states, and non-profits put resources into promoting the hangtag, consumers will be more likely to ask for it and base their purchasing decisions on it.  The first companies to start using the hangtag could see a boost in their sales and it could put pressure on the mainstream companies to use the hangtag, if they aren’t already.

“This hangtag will help consumers not only choose cleaner stoves, but also to choose companies committed to making cleaner stoves,” said John Ackerly, President of the Alliance for Green Heat.  “If the stove you buy today already meets the 2020 standards, the parts and service for that stove are more likely to be available 5-10 years from now, when you need it,” Ackerly added.

#  #  #
Visit the EPA’s page on the voluntary hang-tag.  For more on problems with EPA listings on Btu output per hour, the lack of disclosure of stove efficiencies, the EPA’s 2020 emission standards for stoves and boilers and PFI pellet certification scheme.

Heated Up!